Mig Fuzz SE Weston
The Mig Fuzz Special Vintage Edition #14
The Mig Fuzz Special Vintage Edition #14
Vintage Weston Microamperes D.C. meter
1 in stock~
Domestic shipping: $free
International Shipping: $50.00
***International shipping is estimated.
….This item has sold.
***The Mig Fuzz Special Edition #14 with vintage Weston Microamperes DC meter. For folks that want the best! These enclosures are slightly deeper than the units with the little VU meter.
***Please Read: This box carries a very special beat up and worn black vintage meter. Military grade. Tough as nails. The nicks scrapes and dents just can’t be replicated. A testament to a life time of hard knocks. Im always thrilled to give these meters a second chance at life. There is beauty in destruction. Wisdom in the scars. While we may never know its full story, the many ways it was used or the people who used it we still can enjoy its beauty. How old it’s it? I cants say for sure but “Stark Electronic Instruments” devices are listed one vintage radio sites and forums. So probably older than 50 years. Thats is my best guess.
More info…. Recently we put our Mig Fuzz into an aluminum box. We have had many requests for a more durable “non-wood” version. After receiving a custom order for one we decided it was time to make this available. Same circuit as in the wood box version but we added 2 additional mods. In the mixable parallel circuit I made the clean gain stage adjustable and added some diode clipping on a potentiometer. If you dial in only the parallel circuit and turn the diode clipping up it will give a completely different sounding pedal. This adds more tonal possibilities to an already versatile pallet of possible sounds.
Be advised this is a large pedal: 4 5/8ths” by 7 1/4th” They are 2 3/4th” thick. Price includes 2-3day priority sipping anywhere in the USA. We will cover half the international shipping to make it easier for our friends overseas!
This pedal also uses some unique vintage parts. We may only have enough for another 6-10 units after these. – Johnathan
More about the Mig Fuzz:
The newly redesigned Mig Fuzz is a classic 4 stage cascading amplifier distortion circuit with a mid range tone control featuring three very useful mods. This unit operates on a standard 9volt power supply (not included)
Mod one: (1st toggle) First stage clipping bypass. When active the tone sounds a little warmer. Its not a drastic change but a seasoned musician will notice the difference when playing.
Mod two: (2nd Toggle) Tone stack toggle greatly changes sound of tone stack and gives the pedal a more classic “Tone Bender” sound.
Mod three: (Mix Knob) This is a repeating theme with RML pedals. It provides a mix between the main distortion and a more gentler overdrive signal. This gives you the option to mix in that more solid signal with your fully distorted signal creating a nice pallet of tonal possibilities. If you love the tone of your amp you don’t have to choose between one or the other. This is a highly recommended pedal for recording.
Using some very special vintage NOS parts to create a modern classic:
The Mig Fuzz uses a NOS (new old stock) Soviet capacitor at the heart of the tone stack. The parts are pre tested for accuracy and hand selected. Parts like this are not something you will find in other Fx pedals. We believe the insides should be as unique as the outsides The Mig Fuzz also uses 2 wire wound thimble resistors in the input and output paths. An Allen-Bradley carbon resistor guides your instruments signal in and through a very unusual .22uf capacitor. (Only the next 5 Mig Fuzz units will have this capacitor)
***Retro Mechanical Labs distortion boxes are designed to look like old test equipment of the 1950s while providing a modern sound using a unique combination of vintage parts when possible. Old stock antique meters are for look and feel only and may very in performance.
***Units are always shipped ASAP. If payment is received during regular post office hours, package normally goes out same day.
*If you request special shipping, please contact RML via email at johnathan@RMLfx.com after placing your order.
*INTERNATIONAL BUYERS remember all taxes, tariffs or additional fees are covered by you and your responsibility to pay upon pickup/receipt of item(s). Please check with your customs office for more details.
November 1, 2019 Uncategorized